<table border="0"
StripFlock® Pro Heat Transfer Vinyl
The Only Flock in the Industry that can be Layered on Itself!
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs.
StripFlock Pro is CPSIA Certified so you can decorate kids’ items with confidence.
<table border="0"
PVC composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils
• 45°/60° blade•Can be layered
<table border="0"
<table border="1"
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 20-25 (45°) / 15-20 (60°)
Offset: .250
Speed: 10
<td style="text-align: center;" Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Iron On
Blade: Standard, 4
Material: Heat Transfer, Flocked
Material: Smooth
Speed: 5
Force: 6
<td style="text-align: center;" Scan N Cut:
Blade: Standard, 4
Cut Speed: 5
Cut Pressure: 2
Blade: 45°
Gram Force: 80-120
Offset: .250
Speed: 30 cm/s
Blade: 45°
Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Blade: AutoBlade
Cut Speed: 5
Half Cut: 4
Always perform a test cut prior to cutting designs.
<table border="1"
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
<td style="text-align: left; padding-left: 30px;" valign="middle" Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C
• Use light/medium pressure for 15 seconds
• Peel carrier warm (at least 10 seconds off press)
<table border="1"
100% cotton
Poly/cotton blends
100% polyester
Leather
Siser Weeder
<td style="text-align: center;" Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
<table border="0"
<table border="0"
<table align="center"




Reviews
There are no reviews yet.