Siser EasyPatterns Plus Satin 11.8″ Roll (Pre-Masked) Clearance Best Pices

<table align="center" cellpadding="10" cellspacing="0"

<td height="246"

EasyPatterns® Plus Satin Heat Transfer Vinyl

Pre-Masked Patterns with a sleek, satin finish!

EasyPatterns Plus are the easiest way to create multi-color designs with a classy semi-gloss sheen! Featuring the same benefits as EasyPatterns Plus, this material is pre-printed and pre-masked, eliminating the need for a 2-step application process. With abstract, colorful patterns that are made with a unique manufacturing process, no two sheets or rolls of material will be exactly the same! Experience a slightly new style whenever you use EasyPatterns Plus Satin and give your designs a fresh new look every time!

EasyPatterns are CPSIA Certified so you can decorate kids’ items with confidence.

<td

<table align="center" cellpadding="10" cellspacing="0"

Specifications:
PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.54 Mils
• 45°/60° blade

<table align="center" cellpadding="10" cellspacing="0"

CUTTER SETTINGS <td height="150" Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-10
Offset: .250
Speed: 10

<td height="150" Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Iron-On Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer, (Non-Cricut)

<td Silhouette Cameo 4:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Material: Smooth
Speed: 8
Force: 6 Scan N Cut DX:
Blade: AutoBlade, 3
Cut Speed: 5
Half Cut: Auto Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s Graphtec:
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.

<table align="center" cellpadding="10" cellspacing="0"

APPLICATION INSTRUCTIONS <td style="text-align: left; padding-left: 30px;" height="246" Application Instructions (home iron)
• Mirror design and cut according to your cutter’s settings
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron) for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

<td style="text-align: left; padding-left: 30px;" Application Instructions (heat press)
• Cut material – MIRROR!
• Weed excess material
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

<table align="center" cellpadding="10" cellspacing="0"

RECOMMENDED ACCESSORIES & CARE <td height="150" EasyPatterns Satin Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather Recommended Accessories:
Siser Weeder

<td Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach

<table align="center" cellpadding="10" cellspacing="0"

<table style="height: 232.906px;" align="center"