<table align="center" cellpadding="10" cellspacing="0"
HT-Multi Colored Foil
Beautiful & Shiny Multi Color Experience!
HT-Multi colored foil heat transfer vinyl gives an unique addition to your vinyl projects. These beautiful and shiny multi color vinyls will change your design to an eyecatching and memorable piece.
<td
<table align="center" cellpadding="10" cellspacing="0"
Blade: Standard
Setting: Light Cardstock
Blade: Standard, 3
Material: Heat Transfer
Material: Smooth
Speed: 8
Force: 14
<td Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3
Blade: 45°
Gram Force: 180-190
Offset: 250
Speed: 30 cm/s
Blade: 45°
Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s
Always perform a test cut prior to cutting designs.
<table align="center" cellpadding="10" cellspacing="0"
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
<td Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier hot or cold
<table align="center" cellpadding="10" cellspacing="0"
100% cotton
Poly/cotton blends
100% polyester
Leather
Siser Weeder
<td Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
<table align="center" cellpadding="10" cellspacing="0"
<table align="center"




Reviews
There are no reviews yet.