Small U.S. Flag Embroidered Patch (1.875″ x 1.25″) How Much Sale Online

<table align="center" cellpadding="10" cellspacing="0"

Embroidered Patches

Embroidered patches can be ironed on to anything you can iron: Shirts, jeans, hats, blouses, pants, skirts, etc. Make your backpack or tote unique!

Think you are not creative? With an iron on you can create a new look instantly. It’s soooo easy!

Heat seal to polyester/ Cotton fabrics. Do not apply to rain-wear (Waterproof), highly elastic, Rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to garment and is washable, dryable and cleanable. For machine washing, turn garment inside-out before washing and drying.

 

*This product is excluded from all promotional discounts and offers.

<table align="center" cellpadding="10" cellspacing="0"

SETTING INSTRICTIONS USING AN IRON: <td height="100"

Step1: Set your hand iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION.

Step2: Place your embroidered patch in the desired position and place a pressing cloth (such as a handkerchief, sheet or pillowcase fabric) over top.

Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.

Step 4: Turn The garment inside-out and repeat step 2 & 3.

Step 5: Allow the applique or embroidered patch to cool down.

<table align="center" cellpadding="10" cellspacing="0"

SETTING INSTRICTIONS USING A HEAT SEAL MACHINE: <td height="100"

Step1: Set your heat seal machine to 350 degrees.

Step2: Place your embroidered patch in the desired position and place a pressing cloth (such as a handkerchief, sheet or pillowcase fabric) over top.

Step 3: Press iron down for 20 seconds.

Step 4: Increase temperature to 375 degrees. Turn the garment inside-out and press for 15 more seconds.

Step 5: Allow the embroidered patch to cool down.

<table align="center" cellpadding="10" cellspacing="0"

<table align="center"